ICON ADVANCE is an Interior Emulsion offering durability, elegance and ultra-smooth finish to interior surfaces. It is a versatile, washable and economical emulsion paint that can be applied to all types of plaster, concrete and ceilings.
PRODUCT BENEFITS/FEATURES :-
Washable
Low VOC
Extra brightness
Sustains upto 4 years
Rich finish
Interior
COVERAGE :-
2 Coats 130-150 sq.ft/ltr*
HOW TO APPLY :-
SURFACE PREPARATION
For best results, proper surface preparation is essential.
Newly plastered surfaces should be allowed to mature for 6-8 weeks.
The surface to be painted should be clean, dry and free from dust, dirt, or loose particles, grease, chalking, etc., before application of Icon Advance Interior Emulsion.
This should be done by washing the surface with water.
All surfaces to be painted should be thoroughly sanded with emery paper 180 and wiped clean.
All surface seepage or leakage should be properly repaired.
All fungus/algae-affected areas must be treated.
Apply a coat of Primera Active Interior Wall Primer/Primera Interior Primer allow it to dry for 4-6 hours.
For any surface undulations, apply thin coats of JKCement WallMaxX Wall Putty and allow it to dry for 4-6 hours.
Sand the surface with emery paper 180 and wipe it clean.
Apply a coat of Primera Active Interior Wall Primer/Primera Interior Primer allow it to dry for 4-6 hours.
Sand the surface with emery paper 320 and wipe it clean.
APPLICATION
Apply 2-3 coats by diluting 1 litre of Icon Advance Interior Emulsion with 600–650 ml of water, with an interval
of 4-6 hours between the successive coats.
Icon Advance Interior Emulsion can be applied by brush, roller, or spray.
SAFETY PRECAUTIONS
Stir the contents thoroughly and strain before use.
Store Icon Advance Interior Emulsion in a cool and dry place.
Keep the container tightly closed when not in use.
Wash the brush/equipment with water immediately after use.
Do not keep the diluted solution for more than 24 hours.
