JK Icon Tru Shyn JIT 1/P1 [10LT]

ICON TRU-SHYN INTERIOR EMULSION provides long-lasting durability, smooth finish with a soft sheen for interior surfaces. With its excellent coverage and ease of application, it can sustain the smoothness and the finish for upto 4 years.

PRODUCT BENEFITS/FEATURES :-

Superior Sheen
Low VOC
Excellent Coverage
Sustains upto 4 years
Extra Brightness
Ease of Application Interior

COVERAGE :-

HOW TO APPLY :-

SURFACE PREPARATION
For best results, proper surface preparation is essential.
Newly plastered surfaces should be allowed to mature for 6-8 weeks.
The surface to be painted should be clean, dry and free from dust, dirt, or loose particles, grease, chalking, etc., before the application of Icon Tru-shyn Interior Emulsion.
This should be done by washing the surface with water.
All surfaces to be painted should be thoroughly sanded with emery paper 180 and wiped clean.
All surface seepage or leakage should be properly repaired.
All fungus/algae-affected areas must be treated.
Apply a coat of Primera Active/Primera Interior Wall Primer allow it to dry for 4-6 hours.
For any surface undulations, apply thin coats of JKCement WallMaxX Wall Putty and allow it to dry for 4-6 hours.
Sand the surface with emery paper 180 and wipe it clean.
Apply another coat of Primera Active/Primera Interior Wall Primer and allow it to dry for 4-6 hours.
Sand the surface with emery paper 320 and wipe it clean.

APPLICATION
Apply 2-3 coats by diluting 1 litre of Icon Tru-shyn Interior Emulsion with 400–450 ml of water with an interval of 4-6 hours between the successive coats.
Icon Tru-shyn Interior Emulsion can be applied by brush, roller, or spray.

SAFETY PRECAUTIONS
Stir the contents thoroughly and strain before use.
Store Icon Tru-Shyn Interior Emulsion in a cool and dry place.
Keep the container tightly closed when not in use.
Wash the brush/equipment with water immediately after use.
Do not keep the diluted solution for more than 24 hours.