JK Primera Interior WHITE [4LT]

PRIMERA INTERIOR WALL PRIMER is a water-thinnable base coat offering superior
brightness, excellent adhesion and sealing properties, along with good resistance to
wall alkalinity. Endowed with fast-drying ability, it is used for priming plastered walls,
concrete, brickwork, etc. Its low-VOC formulation make it an ideal base coat and
is applicable for all water-based products, giving excellent coverage and protection
to interior spaces.

PRODUCT BENEFITS/FEATURES :-

Superior Whiteness Better Opacity
Interior
Higher Top Coat
Coveraage
Low VOC

COVERAGE :-

1 Coat 120-130 sq.ft/ltr/ Coat*

HOW TO APPLY

SURFACE PREPARATION
The surface to be primed should be sound, clean, dry and free from dust, dirt, loose particles, grease, etc.
This should be done by wire brushing and cleaning with water.
All minor cracks and defects should be repaired.
All surface undulations should be levelled with thin coats of JKCement WallMaxX Wall Putty and allowed to dry.
All areas affected by algae, fungus or efflorescence should also be suitably treated.

APPLICATION
Primera Interior Wall Primer should be applied by diluting with water in the ratio of 1:1.
Apply with roller, brush or spray. Allow the surface to dry for 4-6 hours.

SAFETY PRECAUTIONS
Stir the contents thoroughly before use. Store Primera Active Interior Wall Primer in a cool and dry place.
Wash the brush/equipment with water immediately after use.